Nortel Networks 608(WL) - Manual (Page 213)

Chapter 6
Advanced Features
E-DOC-CTC-20051017-0169 v0.1 211
6.10.3 Set or modify the Connection Option list
parameters
modify command The ipsec connection options modify command allows to modify the
options list parameters.
Example In the following example, the options list parameters are modified.
=>ipsec
[ipsec]=>connection
[ipsec connection]=>options
[ipsec connection options]=>modify
name = copt1
[virtual_if] = anystring
[force_df] =
pass
force_set force_clear
[force_df] = pass
[min_mtu] = 1200
[add_route] =
enabled
disabled
[add_route] = enabled
[routed] = disabled
:ipsec connection options modify name=copt1 virtual_if=anystring force_
df=pass min_mtu=1200 add_route=enabled
[ipsec connection options]=>