Nortel Networks 608(WL) - Manual (Page 147)

Chapter 4
Configuration via the Command Line Interface
E-DOC-CTC-20051017-0169 v0.1 145
4.7.2 List all Connections
list command The ipsec connection list command shows the list of all defined
connections.
Example In the following example, a list of all defined connections is shown.
[ipsec connection]=>list
[connect1]
Peer : peer1
Local network : net1
Remote network : (null)
Always on
: disabled
Descriptors : cnctdes1|NullEnc_HMAC-SHA1_TUNNEL
Options :
State : enabled
[ipsec connection]=>
By default, a SpeedTouch™ device does not contain any connections. As a
consequence the
list command will return an empty list on a new
device.