Dialling in, Chapter 3 – Nortel Networks 608(WL) User Manual
Page 62
Chapter 3
Configuration via Local Pages
E-DOC-CTC-20051017-0169 v0.1
60
Dialling in
1
Select the VPN server from the table and click Dial-In at the bottom of the
screen.
As a result, the VPN Client Connect page is shown.
2
Fill out the login parameters and click Continue.
The SpeedTouch™ starts the negotiations to set up the secure VPN
connection. The outcome of the dial-up procedure is shown on the screen.
All active VPN connections are shown at the bottom of the VPN Client Connection
Configuration page.
VPN Client Connect
Page
The layout of the VPN Client Connect page depends on the IKE Authentication
method and Server Vendor you selected in the VPN Client Connection
Configuration page.
The Client Identification parameter is Server Vendor specific.
Below, an example is shown for a connection to a Cisco VPN server.
When you encounter problems to set up the VPN connection, you can use
the Debug page to diagnose the problem. See