5 delete a connection security descriptor, Delete command, Example – Nortel Networks 608(WL) User Manual
Page 136: Delete a connection security descriptor, Chapter 4
Chapter 4
Configuration via the Command Line Interface
E-DOC-CTC-20051017-0169 v0.1
134
4.5.5 Delete a Connection Security Descriptor
delete command
The
ipsec connection descriptor delete
command deletes a
Connection Descriptor.
Example
In this example the user-defined Connection Security Descriptor , named cnctdes1,
is deleted:
The result of this operation is verified with the
list
command.
[ipsec connection descriptor]=>delete
name = cnctdes1
:ipsec connection descriptor delete name=cnctdes1
[ipsec connection descriptor]=>
[ipsec connection descriptor]=>list
[AES_SHA1_TUN] : AES(128) HMAC-SHA1 Lifetime 86400s Tunnel Mode
[AES_MD5_TUN] : AES(128) HMAC-MD5 Lifetime 86400s Tunnel Mode
[AES_SHA1_PFS_TUN] : AES(128) HMAC-SHA1 PFS Lifetime 86400s Tunnel Mode
[AES_MD5_PFS_TUN] : AES(128) HMAC-MD5 PFS Lifetime 86400s Tunnel Mode
[3DES_SHA1_TUN] : 3DES HMAC-SHA1 Lifetime 86400s Tunnel Mode
[3DES_MD5_TUN] : 3DES HMAC-MD5 Lifetime 86400s Tunnel Mode
[3DES_SHA1_PFS_TUN] : 3DES HMAC-SHA1 PFS Lifetime 86400s Tunnel Mode
[3DES_MD5_PFS_TUN] : 3DES HMAC-MD5 PFS Lifetime 86400s Tunnel Mode
[DES_SHA1_TUN] : DES HMAC-SHA1 Lifetime 86400s Tunnel Mode
[DES_MD5_TUN] : DES HMAC-MD5 Lifetime 86400s Tunnel Mode
[AES_SHA1_Adv_TUN] : AES(256) HMAC-SHA1 PFS Lifetime 86400s Tunnel Mode
[3DES_SHA1_Adv_TUN] : 3DES HMAC-SHA1 PFS Lifetime 86400s Tunnel Mode
[NullEnc_SHA1_TUN] : NULL HMAC-SHA1 Lifetime 86400s Tunnel Mode
[ipsec connection descriptor]=>