Nortel Networks 608(WL) - Manual (Page 186)

Chapter 6
Advanced Features
E-DOC-CTC-20051017-0169 v0.1 184
Push IP address
[push_ip]
The VPN server will always provide an IP address to the remote VPN client. VPN
clients can behave in two different ways.
Either:
the VPN client requests an IP address. Then the VPN server responds to this
request, and provides a suitable IP address.
Or:
The VPN client does not issue a request for an IP address. In this case, the VPN
server pushes an IP address to the VPN client. The client acknowledges the receipt
of the IP address.
VPN clients IP address
range
Specifies the range of IP addresses from which the client addresses are selected. An
address range or a subnet can be entered for this parameter.
Examples:
10.20.30.[5-50]
10.20.30.0/24
Client netmask Specifies the netmask provided to the client. Either the dotted decimal format can
be used, or an integer between 0 and 32 can be entered.
Examples:
255.255.255.0
24
XAuth pool This parameter contains the symbolic name of the XAuth users pool. A specific
command group is available to define a XAuth pool. See section XAuth Users Pool.
push_ip Possible values Description default value
enabled VPN server does
not await client
request for IP
address and
pushes an IP
address to client. disabled
disabled VPN server waits
for a client
request before
assigning an IP
address to the
client.