Nortel Networks 608(WL) - Manual (Page 114)

Chapter 4
Configuration via the Command Line Interface
E-DOC-CTC-20051017-0169 v0.1 112
Cryptographic function
[crypto]
The table below shows the encryption algorithms supported by the SpeedTouch™
along with their corresponding key size:
DES is relatively slow and is the weakest of the algorithms, but it is the
industry standard.
3DES is a stronger version of DES, but is the slowest of the supported
algorithms (for a comparable key length).
AES is the new encryption standard selected by the American government to
replace DES/3DES. It is recommended to use AES since it is the most
advanced of the supported encryption methods.
Key length [keylen] The SpeedTouch™ supports 3 different key lengths for the AES encryption
algorithm. The
keylen parameter assigns the key length for this algorithm. Three
values are valid, as specified in the table above.
Authentication Hashing
function [integrity]
The SpeedTouch™ supports two types of hashing algorithms:
HMAC is always used as integrity algorithm, combined with either MD5 or
SHA1.
SHA1 is stronger than MD5, but slightly slower.
Diffie-Hellman group
[group]
The table below shows the supported Diffie-Hellman groups:
Algorithm Valid key sizes
(bits) Popular sizes Default size
DES 56 56 56
3DES 168 168 168
AES 128, 192, 256 128, 192, 256 -
The DES and 3DES algorithms have a fixed key length. For these algorithms
the [keylen] parameter is not shown in the CLI.
Hashing algorithm
MD5
SHA1
Diffie-Hellman group
number number of bits Keyword
1 768 MODP768
2 1024 MODP1024
5 1536 MODP1536