Polycom SOUNDPOINT SIP 2.2.0 - Manual (Page 79)

Configuring Your System
4 - 31
the SoundPoint IP 430, 500, 501, 550, 600, 601, and 650). A message-waiting
signal from a voice mail server will trigger the message-waiting indicator to
flash.
Configuration changes can performed centrally at the boot server or locally:
Multiple Registrations
The SoundPoint IP 301, 320, 330, and 430 support a maximum of two
registrations, the SoundPoint IP 501 supports three, the SoundPoint IP 550
supports four, and the SoundPoint IP 600, 601, and 650 support 6. Up to three
SoundPoint IP Expansion Modules can be added to a single host SoundPoint
IP 601 and 650 phone increasing the total number of buttons to 12 registrations
on the IP 601 and 34 registrations on the IP 650. The SoundStation IP 4000
supports a single registration.
Each registration can be mapped to one or more line keys (a line key can be
used for only one registration). The user can select which registration to use for
outgoing calls or which to use when initiating new instant message dialogs.
Central
(boot server)
Configuration file:
sip.cfg For one-touch voice mail access, enable the “one-touch voice mail”
user preference.
• For more information, refer to User Preferences on page
A-23 .
Configuration file:
phone1.cfg For one-touch voice mail access, bypass instant messages to
remove the step of selecting between instant messages and voice
mail after pressing the Messages key on the SoundPoint IP 430, 500,
501, 550, 600, 601, and 650 (instant messages are still accessible
from the Main Menu).
On a per-registration basis, specify a subscribe contact for solicited
NOTIFY applications, a callback mode (self call-back or another
contact), and the contact to call when the user accesses voice mail.
• For more information, refer to Messaging on page A-96 .
Local Web Server
(if enabled)
For one-touch voice mail access, enable the “one-touch voice mail”
user preference and bypass instant messages to remove the step of
selecting between instant messages and voice mail after pressing the
Messages key on the SoundPoint IP 430, 500, 501, 550, 600, 601,
and 650 (instant messages are still accessible from the Main Menu).
Navigate to http:///coreConf.htm#us
On a per-registration basis, specify a subscribe contact for solicited
NOTIFY applications, a callback mode (self call-back or another
contact) to call when the user accesses voice mail.
Navigate to http:///reg.htm
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. Changes will permanently
override global settings unless deleted through the Reset Local
Config menu selection and the -phone.cfg is
removed from the boot server.