Basic logging Page 183
Page 183
Configuration Files
A - 71
Basic Logging
This configuration attribute is defined as follows:
Attribute
Permitted
Values
Default
Interpretation
log.level.change.xxx
0-5
4
Control the logging detail level for
individual components. These are
the input filters into the internal
memory-based log system.
Possible values for xxx are so,
app1, sip, sspsc, ssps, pps, net,
cfg, cdp, pmt, ftp, ares, dns, cxss,
httpd, rdisk, copy, slog, res, key,
log, curl, rtos, mb, ib, sotet, ttrs,
srtp, usb, .
log.render.level
0-6
1
Specifies the lowest class of event
that will be rendered to the log files.
This is the output filter from the
internal memory-based log system.
The log.render.level maps to
syslog severity as follows:
0 -> SeverityDebug (7)
1 -> SeverityDebug (7)
2 -> SeverityInformational (6)
3 -> SeverityInformational (6)
4 -> SeverityError (3)
5 -> SeverityCritical (2)
6 -> SeverityEmergency (0)
7 -> SeverityNotice (5)
For more information, refer to
.
log.render.type
0-2
2
Refer to above table for timestamp
type.
log.render.realtime
0, 1
1
Set to 1.
Note: Polycom recommends that
you do not change this value.
log.render.stdout
0, 1
1
Set to 1.
Note: Polycom recommends that
you do not change this value.
log.render.file
0, 1
1
Set to 1.
Note: Polycom recommends that
you do not change this value.