Do not disturb, Do not disturb –8 – Polycom SOUNDPOINT SIP 2.2.0 User Manual
Page 56
Administrator’s Guide SoundPoint IP / SoundStation IP
4 - 8
Do Not Disturb
A Do Not Disturb (DND) feature is available to temporarily stop all incoming
call alerting. Calls can optionally be treated as though the phone is busy while
DND is enabled. DND can be configured as a per-registration feature.
Incoming calls received while DND is enabled are logged as missed. For more
information on forwarding calls while DND is enabled, refer to
on page
Server-based DND is active if the feature is enabled on both the phone and the
server and the phone is registered. The server-based DND feature is applicable
for all registrations on the phone (no per-registration mode) and it disables
local Call Forward and DND features.
Server-based DND will behave the same as per-SIP2.1 per-registration feature
with the following exceptions:
• There is no indication on the phone’s user interface whether or not
server-based DND is active.
• If server-based DND is enabled, but inactive, and the user presses the
DND key or selects the DND option on the Feature menu, the “Do Not
Disturb” message does not appear on the user’s phone (incoming call
alerting will continue).
Configuration changes can performed centrally at the boot server or locally:
Note
Server-based DND is disabled if Shared Call Appearance or Bridged Line
Appearance is enabled.
Central
(boot server)
Configuration file:
sip.cfg
Enable or disable server-based DND.
•
For more information, refer to
on page
Specify whether or not DND results in incoming calls being given
busy treatment.
•
For more information, refer to
.
Configuration file:
phone1.cfg
Enable or disable server-based DND as a per-registration feature.
•
For more information, refer to
on page
.
Specify whether DND is treated as a per-registration feature or a
global feature on the phone.
•
For more information, refer to
on page
Local
Local Phone User
Interface
Enable or disable DND using the “Do Not Disturb” key on the
SoundPoint IP 301, 501, 550, 600, 601, and 650 or the “Do Not
Disturb” option on the Features menu on the SoundPoint IP 320, 330,
and 430 and SoundStation IP 4000.