Polycom SOUNDPOINT SIP 2.2.0 - Manual (Page 213)

Configuration Files
A - 101
device.prov.serverName any string For descriptions, refer to Server Menu on page 3-9 .
device.prov.serverType 0 to 4
device.prov.user any string
device.prov.password any string
device.prov.appProvType 0 or 1
device.prov.appProvString any string
device.prov.redunAttemptLi
mit 10, Null
device.prov.redunInterAtte
mptDelay 300, Null
device.sntp.serverName any string Can be dotted-decimal IP address or domain name
string. SNTP server from which the phone will obtain
the current time
device.sntp.gmtOffset -43200 to 46800 GMT offset in seconds, corresponding to -12 to +13
hours.
device.dns.serverAddress dotted-decimal IP address Primary server to which the phone directs Domain
Name System queries.
device.dns.altSrvAddress dotted-decimal IP address Secondary server to which the phone directs Domain
Name System queries.
device.dns.domain any string The phone’s DNS domain.
device.auth.localAdminPas
sword any string The phone’s local administrator password.
device.auth.localUserPass
word any string The phone user’s local password.
device.auth.regUserx any string The SIP registration user name for registration x
where x = 1 to 12.
device.auth.regPasswordx any string The SIP registration password for registration x
where x = 1 to 12.
device.sec.configEncryptio
n.key any string Configuration encryption key that is used for
encryption of configuration files.
device.syslog.serverName dotted-decimal IP address
OR
domain name string The syslog server IP address or host name.
The default value is NULL.
device.syslog.transport None=0,
UDP=1,
TCP=2,
TLS=3 The protocol that the phone will use to write to the
syslog server.
If set to “None”, transmission is turned off, but the
server address is preserved.
Name Possible Values Description