Idle display animation, Idle display animation –14 – Polycom SOUNDPOINT SIP 2.2.0 User Manual
Page 62
Administrator’s Guide SoundPoint IP / SoundStation IP
4 - 14
Network Time Protocol (SNTP) timeserver. The time and date displayed on
the phone will flash continuously until a successful SNTP response is received
to indicate that they are not accurate. The time and date display can use one of
several different formats and can be turned off.
Configuration changes can performed centrally at the boot server or locally:
Idle Display Animation
All phones except the SoundPoint IP 301 can display a customized animation
on the idle display in addition to the time and date. For example, a company
logo could be displayed (refer to
).
Central
(boot server)
Configuration file:
sip.cfg
Turn time and date display on or off.
•
For more information, refer to
Set the time and date display formats.
•
For more information, refer to
page
Set the basic SNTP settings and daylight savings parameters.
•
For more information, refer to
on
page
Local
Web Server
(if enabled)
Set the basic SNTP and daylight savings settings.
Navigate to: http://
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. Changes will permanently
override global settings unless deleted through the Reset Local
Config menu selection and the
removed from the boot server.
Local Phone User
Interface
The basic SNTP settings can be made in the Network Configuration
menu.
For more information, refer to
on
page
.
The user can edit the time and date format and enable or disable the
time and date display under the Settings menu.
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. They will permanently
override global settings unless deleted through the Reset Local
Config menu selection.