Polycom SOUNDPOINT SIP 2.2.0 User Manual
Page 38
Administrator’s Guide SoundPoint IP / SoundStation IP
3 - 10
Server Address
dotted-decimal IP address
OR
domain name string
OR
URL
All addresses can be followed
by an optional directory and
optional file name.
The boot server to use if the DHCP client is disabled, the
DHCP server does not send a boot server option, or the
Boot Server parameter is set to Static. The phone can
contact multiple IP addresses per DNS name. These
redundant boot servers must all use the same protocol. If
a URL is used it can include a user name and password.
Refer to
Supported Provisioning Protocols
on page
. A
directory and the master configuration file can be
specified.
Note: ":", "@", or "/" can be used in the user name or
password these characters if they are correctly escaped
using the method specified in RFC 1738.
Server User
any string
The user name used when the phone logs into the server
(if required) for the selected Server Type.
Note: If the Server Address is a URL with a user name,
this will be ignored.
Server Password
any string
The password used when the phone logs in to the server
if required for the selected Server Type.
Note: If the Server Address is a URL with user name and
password, this will be ignored.
File Transmit Tries
1 to 10
Default 3
The number of attempts to transfer a file. (An attempt is
defined as trying to download the file from all IP
addresses that map to a particular domain name.)
Retry Wait
0 to 300
Default 1
The minimum amount of time that must elapse before
retrying a file transfer, in seconds. The time is measured
from the start of a transfer attempt which is defined as the
set of upload/download transactions made with the IP
addresses that map to a given boot server's DNS host
name. If the set of transactions in an attempt is equal to or
greater than the Retry Wait value, then there will be no
further delay before the next attempt is started.
For more information, refer to
on page
.
Provisioning
Method
Default or SAS-VP
If SAS-VP is selected, provisioning is done (in addition to
the normal process).
Network
Cable/DSL,
LAN,
Dial-up
The network environment the phone is operating in.
The default value is Cable/DSL.
Tag SN to UA
Disabled, Enabled
If enabled, the phone’s serial number (MAC address) is
included in the User-Agent header of the Microbrowser.
The default value is Disabled.
Provisioning String
any string
The URL used in XML post/response transactions. If
empty, the configured URL is used.
This field is disabled when Provisioning Method is
Default.
Name
Possible Values
Description