Directed call pick-up, Directed call pick-up –19 – Polycom SOUNDPOINT SIP 2.2.0 User Manual
Page 67
Configuring Your System
4 - 19
Configuration changes can performed centrally at the boot server or locally:
Directed Call Pick-Up
Calls to another phone can be picked up by dialing the extension of the other
phone. This feature depends on support from a SIP server.
Configuration changes can performed centrally at the boot server:
Note
Server-based call forwarding is disabled if Shared Call Appearance or Bridged Line
Appearance is enabled.
Central
(boot server)
Configuration file:
sip.cfg
Enable or disable server-based call forwarding.
•
For more information, refer to
on page
Configuration file:
phone1.cfg
Enable or disable server-based call forwarding as a per-registration
feature.
•
For more information, refer to
on page
Set all call diversion settings including a global forward-to contact and
individual settings for call forward all, call forward busy, call forward
no-answer, and call forward do-not-disturb.
•
For more information, refer to
on page
Local
Web Server
(if enabled)
Set all call diversion settings.
Navigate to: http://
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. Changes will permanently
override global settings unless deleted through the Reset Local
Config menu selection and the
removed from the boot server.
Local Phone User
Interface
The user can set the call-forward-all setting from the idle display
(enable/disable and specify the forward-to contact) as well as divert
callers while the call is alerting.
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. Changes will permanently
override global settings unless deleted through the Reset Local
Config menu selection and the
removed from the boot server.
Central
(boot server)
Configuration file:
sip.cfg
Turn this feature on or off.
•
For more information, refer to
.