Routing Page 206
Page 206
Administrator’s Guide SoundPoint IP / SoundStation IP
A - 94
This configuration attribute is defined as follows:
Routing
This attribute allows specific routing paths for outgoing SIP calls to be
configured independent of other ‘default’ configuration.
This attribute includes:
•
•
Server
This configuration attribute is defined as follows:
Attribute
Permitted
Values
Default
Interpretation
dialplan.x.digitmap
A string compatible with the
digit map feature of MGCP
described in 2.1.5 of RFC
3435; string is limited to 768
bytes and 30 segments; a
comma is also allowed; a
comma is also allowed;
when reached in the digit
map, a comma will turn dial
tone back on;’+’ is allowed
as a valid digit; extension
letter ‘R’ is used as defined
above.
Null
When present, this attribute
overrides the global dial plan
defined in the sip.cfg
configuration file.
For more information, refer to
dialplan.x.digitmap.timeOut
string of positive integers
separated by ‘|’
Null
When present, and if
dialplan.x.digitmap
is not
Null, this attribute overrides the
global dial plan defined in the
sip.cfg configuration file.
For more information, refer to
Attribute
Permitted Values
Default
Interpretation
dialplan.x.routing.server.y.add
ress
dotted-decimal IP address
or host name
Null
IP address or host name and
port of a SIP server that will
be used for routing calls.
Multiple servers can be listed
starting with y=1, 2, ... for
fault tolerance.
dialplan.x.routing.server.y.port
1 to 65535
5060