Polycom SOUNDPOINT SIP 2.2.0 - Manual (Page 192)

Administrator’s Guide SoundPoint IP / SoundStation IP
A - 80
Idle Display
The Microbrowser can be used to create a display that will be part of the
phone’s idle display. These settings control the home page and the refresh rate.
Attribute Permitted Values Default Interpretation
mb.idleDisplay.home Null or any fully
formed valid HTTP
URL. Length up to
255 characters. Null URL used for Microbrowser idle display home
page. For example:
http://www.example.com/xhtml/frontpage.cgi?pa
ge=home. If empty, there will be no
Microbrowser idle display feature. Note that the
Microbrowser idle display will displace the idle
display indicator (refer to
ind.idleDisplay.enabled
in Indicators
on page A-65 ).
mb.idleDisplay.refresh 0 or an integer > 5 0 The period in seconds between refreshes of the
idle display Microbrowser's content. If set to 0,
the idle display Microbrowser is not refreshed.
The minimum refresh period is 5 seconds
(values from 1 to 4 are ignored, and 5 is used).
Note: If an HTTP Refresh header is detected, it
will be respected, even if this parameter is set to
0. The refresh parameter will be respected only
in the event that a refresh fails. Once a refresh is
successful, the value in the HTTP refresh
header, if available, will be used.