Main menu – Polycom SOUNDPOINT SIP 2.2.0 User Manual
Page 34
Administrator’s Guide SoundPoint IP / SoundStation IP
3 - 6
Main Menu
The following configuration parameters can be modified on the main setup
menu:
Name
Possible Values
Description
DHCP Client
Enabled, Disabled
If enabled, DHCP will be used to obtain the parameters
discussed in
on page
.
DHCP Menu
Refer to
on page
Note: Disabled when DHCP client is disabled.
Phone IP Address
dotted-decimal IP address
Phone’s IP address.
Note: Disabled when DHCP client is enabled.
Subnet Mask
dotted-decimal subnet
mask
Phone’s subnet mask.
Note: Disabled when DHCP client is enabled.
IP Gateway
dotted-decimal IP address
Phone’s default router.
Server Menu
Refer to
.
SNTP Address
dotted-decimal IP address
OR
domain name string
Simple Network Time Protocol (SNTP) server from
which the phone will obtain the current time.
GMT Offset
-13 through +12
Offset of the local time zone from Greenwich Mean
Time (GMT) in half hour increments.
DNS Server
dotted-decimal IP address
Primary server to which the phone directs Domain
Name System (DNS) queries.
DNS Alternate Server
dotted-decimal IP address
Secondary server to which the phone directs Domain
Name System queries.
DNS Domain
domain name string
Phone’s DNS domain.
Ethernet
Refer to
on page
EM Power
Enabled, Disabled
This parameter is relevant if the phone gets Power over
Ethernet (PoE). If enabled, the phone will set power
requirements in CDP to 12W so that up to three
Expansion Modules (EM) can be powered. If disabled,
the phone will set power requirements in CDP to 5W
which means no Expansion Modules can be powered (it
will not work).
Syslog
Refer to
.