Polycom SOUNDPOINT SIP 2.2.0 - Manual (Page 170)

Administrator’s Guide SoundPoint IP / SoundStation IP
A - 58
Hold, Local Reminder
This configuration attribute is defined as follows:
Directory
The directory is stored in either flash memory or RAM on the phone. The
directory size is limited based on the amount of flash memory in the phone.
(Different phone models have variable flash memory.)
call.shared.oneTouchResume 0, 1 0 If set to 1, when a shared line has a call on hold
the remote user can press that line and resume
the call. If more than one call is on hold on the
line then the first one will be selected and
resumed automatically.
If set to 0, pressing the shared line will bring up
a list of the calls on that line and the user can
select which call the next action should be
applied to.
Note: This parameter affects the SoundStation
IP 4000 phone. For other phones a quick press
and release of the line key will resume a call
whereas pressing and holding down the line
key will show a list of calls on that line.
call.shared.exposeAutoHolds 0, 1 0 If set to 1, on a shared line, when setting up a
conference, a re-INVITE will be sent to the
server.
If set to 0, no re-INVITE will be sent to the
server.
Attribute
Permitted
Values
Default Interpretation
Attribute
Permitted
Values
Default Interpretation
call.hold.localReminder.enabled 0, 1 0 If set to 1, periodically notify the local
user that calls have been on hold for
an extended period of time.
call.hold.localReminder.period non-negative
integer 60 Time in seconds between subsequent
reminders.
call.hold.localReminder.startDelay non-negative
integer 90 Time in seconds to wait before the
initial reminder.