Polycom SOUNDPOINT SIP 2.2.0 - Manual (Page 175)

Configuration Files
A - 63
IP_500 font
This configuration attribute is defined as follows:
IP_600 font
This configuration attribute is defined as follows:
Keys
These settings control the scrolling behavior of keys and can be used to change
key functions.
SoundPoint IP 301, 320, 330, 430, 501, 550, 600, 601, and 650 and SoundStation
IP 4000 key functions can be changed from the factory defaults, although this
is typically not necessary. For each key whose function you wish to change,
add an XML attribute in the format described in the following table to the
element of the configuration file. These will override the built-in
assignments.
Attribute Permitted Values Default Interpretation
font.IP_500.x.name fontName_height_Uxx00_U
yyFF.fon OR
fontName_height_Uxx00_U
xxFF.fnt Null Defines the font file that will be loaded from
boot server during boot up.
Note: When several font.IP_500.x.name
are defined, the index x must follow
consecutive increasing order.
Attribute Permitted Values Default Interpretation
font.IP_600.x.name fontName_height_Uxx00
_UyyFF.fon OR
fontName_height_Uxx00
_UxxFF.fnt Null Defines the font file that will be loaded from
boot server during boot up.
Note: When several font.IP_600.x.name
are defined, the index x must follow
consecutive increasing order.
Attribute
Permitted
Values
Default Interpretation
key.scrolling.timeout positive
integer 1 The time-out after which a key that is enabled for
scrolling will go into scrolling mode until the key is
released. Keys enabled for scrolling are menu
navigation keys (left, right, up, down arrows), volume
keys, and some context-specific soft keys. The value is
an integer multiple of 500 milliseconds (1=500ms).