Polycom SOUNDPOINT SIP 2.2.0 User Manual
Page 44
Administrator’s Guide SoundPoint IP / SoundStation IP
3 - 16
local conditions. Changing the default daylight savings parameters will
likely be necessary outside of North American locations.
a
(Optional) Disable the local web (HTTP) server or change its
signalling port if local security policy dictates.
b
Change the default location settings for user interface language and
time and date format.
3.
(Optional) Create a master configuration file by performing the following
steps:
a
Create per-phone or per-platform
using the 00000000000.cfg and files from the distribution as templates.
For more information, refer to
on page
b
Edit the CONFIG_FILES attribute of the
so that it references the appropriate phone[MACaddress].cfg file.
For example, replace the reference to phone1.cfg with
phone[MACaddress].cfg.
c
Edit the CONFIG_FILES attribute of the
so that it references the appropriate sipXXXX.cfg file.
For example, replace the reference to sip.cfg with sip650.cfg.
d
Edit the LOG_FILE_DIRECTORY attribute of the
address>.cfg files so that it points to the log file directory.
e
Edit the CONTACT_DIRECTORY attribute of the
address>.cfg files so that it points to the organization’s contact
directory.
4.
Reboot the phones by pressing the reboot multiple key combination.
For more information, refer to
on page
.
The bootROM and SIP application modify the APPLICATION
APP_FILE_PATH attribute of the
references the appropriate sip.ld files.
For example, the reference to sip.ld is changed to 2345-11605-001.sip.ld to
boot the SoundPoint IP 601 image.
Note
At this point , the phone sends a DHCP Discover packet to the DHCP server. This
is found in the Bootstrap Protocol/option "Vendor Class Identifier" section of the
packet and includes the phone’s part number and the bootROM version.
For example, a SoundPoint IP 650 might send the following information:
5EL@
DC?5cSc52*46*(9N7*
For more information, refer to
on page
.