Proxim ORINOCO AP-2000 - Manual (Page 51)

51
Performing Advanced Configuration
1. Confirm that Auto Channel Select is disabled.
2. Write down the MAC Address of the radio that you wish to include in the Wireless Distribution System.
3. Click on Interfaces > Wireless-A or Wireless-B.
4. Scroll down to the Wireless Distribution System heading.
5. Click the Edit button to update the Wireless Distribution System (WDS) Table (see
Figure 4-8 ).
Figure 4-8 WDS Edit Entry Screen
The WDS Configuration screen will be displayed (see Figure 4-9 ).
Figure 4-9 WDS Configuration Screen
6. If desired, enable security by checking the Enable WDS Security Mode box.