Security parameters, Radius parameters, Mac access control parameter – Proxim ORINOCO AP-2000 User Manual
Page 175: Using the command line interface (cli), Mac access control table
175
Using the Command Line Interface (CLI)
NOTE
The Wireless Distribution System (WDS) feature is not available for 802.11a or 802.11b/g APs at this time.
Security Parameters
MAC Access Control Parameter
MAC Access Control Table
RADIUS Parameters
General RADIUS Parameters
RADIUS Server Configuration Parameters
NOTE
Use a server name only if you have enabled the DNS Client functionality. See
DNS Client for RADIUS Name
Resolution
.
Name
Type
Values
Access
CLI Parameter
MAC Address Control
Group
N/A
R
macacl
Status
Integer
enable
disable (default)
RW
macaclstatus
Operation Type
Integer
passthru (default)
block
RW
macacloptype
Name
Type
Values
Access
CLI Parameter
MAC Address Control
Table
Table
N/A
R
macacltbl
Table Index
N/A
N/A
R
index
MAC Address
PhysAddress
User Defined
RW
macaddr
Comment (optional)
DisplayString
User Defined
max 254 characters
RW
cmt
Status (optional)
Integer
enable (default)
disable
delete
RW
status
Name
Type
Values
Access CLI Parameter
RADIUS
Group
N/A
R
radius
Client Invalid Server
Address
Counter32
N/A
R
radcliinvsvradd
Name
Type
Values
Access CLI Parameter
RADIUS Authentication
Table
N/A
R
radiustbl
Table Index (Profile
Index)
Integer
N/A
R
index
Primary/Secondary
Index
Integer
Primary (1)
Secondary (2)
R
subindex
Status
Integer
Enable
Disable
RW
status
Server Address Format
Integer
Ipaddr
Name
RW
seraddrfmt