Ap-2000 with power supply, Getting started – Proxim ORINOCO AP-2000 User Manual
Page 19
19
Getting Started
Figure 2-3
Connect an Ethernet cable from an AE hub to the AP
6. Conduct a Site Survey to determine the best location for your device.
7. Once you have chosen a final location for your unit, mount the wall bracket and the processor module and place
the cover onto the unit as shown.
Figure 2-4
Wall mounting the AP
AP-2000 with Power Supply
1. Clip the power supply into the mounting bracket.
2. Plug the AC power cord into the power supply.