Security profile table, Conf – Proxim ORINOCO AP-2000 User Manual
Page 177
177
Using the Command Line Interface (CLI)
Security Profile Table
The Security Profile Table allows you to configure security profiiles. A maximum of 16 security profiles are supported
per wireless interface.
Each security profile can be enable and configure one or more security modes (None Secure Station, WEP Station,
802.1x Station, WPA Station, WPA-PSK Station). The WEP/PSK parameters are separately configurable for each
security mode.
Command Syntax and Examples of Configuring Security Profiles:
Configuring a Security Profile with Non Secure Security Mode
set secprofiletbl
Configuring a Security Profile with WEP Security Mode
set secprofiletbl
status enable
encryptkeytx 0 status enable
Configuring a Security Profile with 802.1x Security Mode
set secprofiletbl
Configuring a Security Profile with WPA Security Mode
set secprofiletbl
Name
Type
Values
Access CLI Parameter
Security Profile Table
Table
N/A
R
secprofiletbl
Table Index
Integer
1.1 to 5.5
R
index
Security Mode
Integer
nonsecsta
wepsta
802.1xsta
wpasta
wpapsksta
R
secmode
Authentication Mode
Integer
none
802.1x
radius
acl
psk
RW
authmode
Cipher
Integer
none
wep
tkip
aes
R
ciphersuite
Encryption Key 1
Integer
User defined
RW
secprofileencryptkey1
Encryption Key 2
Integer
User defined
RW
secprofileencryptkey2
Encryption Key 3
Integer
User defined
RW
secprofileencryptkey3
Encryption Key 4
Integer
User defined
RW
secprofileencryptkey4
Encryption Transmit Key
Integer
1-4
RW
encryptkeytx
Encryption Key Length
Integer
RW
encryptkeylength
Rekey Interval
Integer
RW
rekeyint
WPA PSK Value
Integer
RW
pskkey
WPA PSK Pass Phrase
Integer
RW
passphrase
RADIUS EAP Profile
Integer
RW
radeapprofile