Proxim ORINOCO AP-2000 - Manual (Page 167)

167
Using the Command Line Interface (CLI)
NOTE
The default path for the Help files is C:/Program Files/ORiNOCO/AP/HTML/index.htm. (Use the forward
slash character ("/") rather than the backslash character ("\") when configuring the Help Link location.) The
AP Help information is available in English, French, German, Italian, Spanish, and Japanese.
Telnet Parameters
Serial Port Parameters
HTTP Password DisplayString User Defined
max 64 characters W httppasswd
HTTP Port Integer User Defined
Default = 80 RW httpport
Help Link DisplayString User Defined RW httphelplink
SSL Status Integer Enable/Disable RW sslstatus
SSL Certificate
Passphrase DisplayString User Defined Write-only sslpassphrase
Name Type Values Access CLI Parameter
Telnet Group N/A R telnet
Telnet Management
Interface Bitmask Interface Bitmask 0 or 2 - no interfaces
(disable)
1 or 3 - Ethernet
4 or 6 - Wireless A
8 or 10 - Wireless B
12 = Wireless A & B
13 or 15 - all interfaces
(default is 15) RW telifbitmask
Telnet Port Integer User Defined
23 (default) RW telport
Telnet Login Inactivity
Time-out Integer 1 – 300 seconds
30 sec (default) RW tellogintout
Telnet Session Idle
Time-out Integer 1 - 900 seconds
900 sec (default) RW telsessiontout
Name Type Values Access CLI Parameter
Serial Group N/A R serial
Baud Rate Integer 2400, 4800,
9600 (default),
19200, 38400, 57600 RW serbaudrate
Data Bits Integer 8 R serdatabits
Parity Integer none R serparity
Stop Bits Integer 1 R serstopbits
Flow Control Value none (default)
xonxoff RW serflowctrl