Proxim ORINOCO AP-2000 - Manual (Page 23)

23
Getting Started
6. Angle the antenna adapter slightly upwards, pinch the end tabs inwards and carefully slide the antenna adapter
onto the mounting bracket.
7. Gently push forward while rotating the antenna downwards and clip the adapter into the small cutouts on the face
of the mounting bracket.
8. Position the antenna for best reception:
• at a 90° angle for flat surface mounts
• at a 180° angle for wall mounts
9. Re-install the cover and mount the AP back in place.
10. Connect the power and Ethernet cables to the AP.
Figure 2-12 Replace cover