Panasonic 1200N - Manual (Page 99)

Basic Configuration and Setup Ongoing Configuration
Centillion 1200N ATM Switch User Manual 8-9
NTP 297-8103-903
3. Define a PVC.
PVC establish [traffic direction] [traffic type]
[originating slot number][originating port
number][vpi][vci][destination slot
number][destination port number] [vpi][vci] [orig-
dest UPC mode] [orig-dest shaper number] [profile
name] [dest-orig UPC mode] [dest-orig shaper number]
[profile name]
Example: PVC ESTABLISH 0 4 02 0 70 03 0 70 1 0 PVC1 1
0 PVC1
The example is a bi-directional UBR PVC, from port 02 to port 03, with UPC
mode of 1 and no shaper assigned. It is using the profile PVC1.
Once defined the PVC becomes operational.
To examine the PVC, perform the command DISPLAY pvc [slot
number][port number] .
(Refer to the DISPLAY pvc command in the Command Manual.)
4. Save the configuration. (optional)
SAVE
When changing the configuration, it is always a good idea to save the configura-
tion.
NOTE