Setting configuration data – Panasonic 1200N User Manual

Page 144

Adding Hardware

Modifications

10-28

Centillion 1200N ATM Switch User Manual

NTP 297-8103-903

Figure 10-30: Example of Adding Hardware (ATM Switch: Slave)

Figure 10-31: Example of Adding Hardware (When Looptime is

Specified)

Setting Configuration Data

To set the clock mode of the ATM Switch, refer to the

SET clock

command in

the Command Manual. To set the loop time, refer the

SET looptime

command

in the Command Manual.

For other hardware, refer to the appropriate manual(s) for the other hardware.

Centillion 1200N