Ch ap te r3 – Pioneer AVIC-Z1 User Manual
Page 42
40
Ch
ap
te
r3
H
o
w to Rea
d
M
a
p
D
ispla
y
NAV
I
Display items
❒ Information with the mark (*) appears only
when the route is set.
❒ Depending on the conditions and settings,
some items may not be displayed.
Current location
The current location of your vehicle. The tip of the
triangular mark indicates your heading and the
display moves automatically as you drive.
❒ The center of the triangular mark is the cur-
rent vehicle position.
Destination*
The checker-flag indicates your destination.
Guidance point*
The next guidance point (next turning point, etc.)
is shown by a yellow flag.
The guidance points of up to three point ahead
including the waypoint are displayed.
waypoint
The checker-flag and number (1 to 5) indicates
your waypoint.
(1) Name of the next street to be used*
(2) Distance to the guidance point*
Touching
allows you to hear the infor-
mation again.
(3) Distance to the destination (or distance to
waypoint)*
The distance on this button shows the distance to
the destination or to each waypoint. If waypoints
are set, the distance to the destination and the
next waypoint chage with each touch.
❒ When the vehicle position is on the route, the
distance to the destination (or waypoint)
appears. When the vehicle position is not on
the route, the linear distance to the destina-
tion (or waypoint) appears.
(4) Name of the street your vehicle is travel-
ing along (or City Name, etc.)
(5) Compass
The red arrow indicates north. If the scale is less
than 25 mi (50 km), touching the map changes
the direction that it is displayed in (north up/
heading up). When the scale of the map is
greater than 25 mi (50 km), it is fixed to [north
up].
Heading up:
The map display always shows the vehicle’s
direction as proceeding toward the top of the
screen.
North up:
The map display always has north at the top of
the screen.
(6) Zoom in/Zoom out
Touch to change the map’s scale.
➲ Changing the map’s scale ➞ Page 41
(7) Map scale
The scale of the map is indicated by distance.
Changing the map’s scale
(8) VOICE icon
Touch to change to the voice recognition mode.
❒ This is displayed only when the microphone
for voice recognition is connected.
➲ The voice operation of the navigation system
(9) Traffic status
This appears when an XM satellite radio tuner
(GEX-P10XMT, sold separately) is connected, and
traffic information is received.
TRFC — No problem.
ANTENNA — Improper antenna connection.
UPDATING — Updating encryption code.
➲ “Checking the Reception Status of the XM
(10) Current time
(11) Estimated time of arrival (or travel time
to your destination)*
The display alternates by pressing it.
The estimated time of arrival is automatically cal-
culated from the Average Speed set and the
actual average speed.
❒ The estimated time of arrival is a guideline
and may not correspond to the actual time of
arrival.
➲ How to set average speed ➞ Page 93
(12) Tracking dot
The tracking dot shows the route your vehicle has
traveled by white dots.
➲ Select the tracking setting ➞ Page 45