Pioneer AVIC-Z120BT - Manual

Quick Start Guide
This guide is intended to guide you through the basic functions of this navi-
gation system. For details, please refer to Operation Manual.
Searching for your destination
by address
1
Display the “ Destination
Menu ” screen and touch
Address .
2
Input the information that
you want to set as the des-
tination.
Touch one of the options.
After narrowing down your desti-
nation, the Location confirma-
tion screen will appear.
3
Touch OK .
After searching for the destina-
tion, the Route confirmation
screen appears.
4
Touch OK .
The navigation system gives you
route guidance both visually and
by voice.
Display the menu screen
Published by Pioneer Corporation.
Copyright © 2010 by Pioneer Corporation.
All rights reserved.
Printed in Thailand
<10B00000> UC
FLASH MEMORY MULTIMEDIA AV NAVIGATION RECEIVER
AVIC-Z120BT
Destination Menu
Touch Destination on the “ Top Menu ” screen.
4 1
6
2 3
1 Searches for location by
address
2 Calculates the route home
3 Searches for a place from
stores, restaurants, and
other businesses in the
points of interest database
4 Searches for POIs by using
the data on external storage
devices (SD card)
5 Selects your stored location
6 Returns to the previous
screen
7 Selects a previously routed
destination
8 Searches for a location by
coordinates
9 Cancels your current route
a Displays the current route
information
b Displays information on
MSN ® Direct
5 7 8 a 9 b
Basic items on the map
1 Name of the street to be
used (or next guidance
point)
2 Current time
3 Estimated time of arrival
4 Current route
5 Current position
6 Street name that your vehi-
cle is traveling along
7 Eco-Meter
8 Zoom in/Zoom out
9 Next direction of travel
Dragging the map
allows scrolling.
8
5
4
3
2
9
AV operation screen Destination Menu Phone Menu
Top Menu
Shortcut Menu
7
1
6
Basic Hardware buttons
1 button
Press briefly to start the voice
operation.
Press and hold to mute the AV
source.
2
VOL (+/–) button
Press to adjust the AV (Audio
and Video) source volume.
3
HOME button
Press to display the “ Top
Menu ” screen.
4 MODE button
Press to switch between the
map screen and the AV opera-
tion screen.
5
TRK (◄/ ►) button
6  button
Press to display the control
panel of the LCD panel.
1 2 3 4 5 6