Pioneer AVIC-Z1 - Manual (Page 27)

25
Cha
pte
r2
Ba
sic
Op
er
at
io
n
NA
V
I
You can change the [View Mode], or set the
items to be displayed during the navigation func-
tion.
❒ [View Mode] can be selected only when the
vehicle position is at the current position. If
you want to select [View Mode] while scroll-
ing the map, press the MAP button to locate
the vehicle position back to the current posi-
tion.
Settings menu
Customize the navigation functions so they can
be used easily.
➲ Settings menu ➞ Chapter 9
Buttons you can use
The availability of a specific button or function is
indicated by its color. Depending on the status of
your vehicle, some buttons will be available, while
others will not be.
Light gray touch key: The button is operable.
Dark gray touch key: The function is not available
(e.g., operation is prohibited while driving).
Basic Navigation
• For safety reasons, you cannot use some of
these basic navigation functions while
your vehicle is in motion. To enable these
functions, you must stop in a safe place
and apply the parking brake (see page 18
Interlock for details).
Basic flow of operation
1
Park your vehicle in a safe place, and
apply the parking brake.
2
Press the MENU button to display the
navigation menu.
3
Select the method of searching for your
destination.
4
Enter the information about your desti-
nation to calculate route.
5
Confirm the location at the map.
6
Checking and fixing the route.
7
Your navigation system sets the route to
your destination, and the map of your
surroundings appears.
8
After releasing the parking brake, drive
in accordance with the navigation infor-
mation, subject to the important safety
instructions noted on page 18 to 19.