Pioneer AVIC-Z1 - Manual (Page 192)

190
Ap
pendix
NAV
I/A
V Data read error. Failed to read the data because the
CD-R is damaged or dirty. Or, the
pick-up lens of the DVD drive is dirty. Try re-reading the data by inserting a
clean CD-R.
Clean the pick-up lens with a com-
mercially available cleaning kit for
DVD, then try to reading again.
The Pictures folder exists on the CD-
R but no data in JPEG format exists. Use the appropriate data after read-
ing “Limitations for import the pic-
ture” on page 97.
JPEG file is corrupt. The data is damaged or an attempt
was made to set a JPEG image, that
is out of specifications, as the back-
ground picture. Use the appropriate data after read-
ing “Limitations for import the pic-
ture” on page 97.
CAUTION!
System detected improper connec-
tion of Parking Brake lead.
Please check your configuration for
safety. Please see Operation Manual
for more information regarding safe
operation. Parking brake lead is incorrectly con-
nected. Confirm once more that their con-
nections are correct.
Connection failed. • The mobile phone’s Bluetooth wire-
less technology is turned off .
• The mobile phone is pared (con-
nected) with another device.
• Rejection by the mobile phone has
received.
• The target mobile phone can not be
found.
• Registration step has been suc-
cessful but connection is fail for
some reason.
• Turn the target phone’s Bluetooth
wireless technology on.
• Cancel the paring (connection) and
retry.
• Operate target phone and accept
the connection request from the
navigation system. (Furthermore,
check the setting related connec-
tion on your mobile phone.)
• Check whether your mobile phone
is turned off or not, whether the dis-
tance to your mobile phone is too
far or not.
• Retry the registration and if a con-
nection still cannot be established,
try connecting using your mobile
phone.
Registration failed. • The mobile phone’s Bluetooth wire-
less technology is turned off during
the registration step.
• Rejection by the mobile phone has
received.
• Registration step is fail for some
reason.
• Keep turning the target phone’s
Bluetooth wireless technology on
during the registration.
• Operate target phone and accept
the registration request from the
navigation system. (Furthermore,
check the setting related connec-
tion on your mobile phone.
• Retry the registration and if a regis-
tration still cannot be failed, try reg-
istering using your mobile phone.
Automatic connection in progress.
Please try again later If you try to perform another opera-
tion during automatic connection by
the system. • Wait for a while and retry.
• Establish that connection tempo-
rarily and retry that later.
Automatic connection in progress.
Please try manually later If you try to connect another phone
during automatic connection by the
system. Establish that connection tempo-
rarily and retry that later.
Could not find any available phone. No available phone is exist on the
surroundings when the system
search the mobile phone featuring
Bluetooth wireless technology for
registration. • Turn the target phone’s Bluetooth
wireless technology on.
• Check whether your mobile phone
is turned off or not, whether the dis-
tance to your mobile phone is too
far or not.
Message When What to do