Using the demonstration guid- ance, Correcting the current location, Restoring the default setting – Pioneer AVIC-Z1 User Manual
Page 100
98
Ch
ap
te
r1
0
Mo
d
if
y
ing
the Gene
ra
l Sett
ings f
o
r N
a
viga
ti
on Functions
NAV
I
Using the Demonstration Guid-
ance
This is a demonstration function for shops. After
a route is set, the simulation of the route guid-
ance to a destination is automatically displayed.
Normally, set this to [Off].
1
Touch [Settings] in the navigation menu.
2
Touch [Demo Mode] to change the set-
ting.
Each time you touch the key changes that set-
ting.
On:
Repeat demo drive.
Off*:
Demo Mode is set off.
Correcting the Current Location
Touch the screen to adjust the current position
and direction of the vehicle displayed on the map.
1
Touch [Settings] in the navigation menu,
then touch [Modify Current Location].
2
Scroll the position where you want to set,
then touch [OK].
3
Touch the arrow key on the screen to set
the direction, then touch [OK].
Restoring the Default Setting
Reset various settings registered to the naviga-
tion system and restores to the default or factory
settings.
1
Touch [Settings] in the navigation menu,
then touch [Restore Factory Settings].
2
Touch [Yes] to clear the current setting.
❒ Touch [Back] to cancel clear the current
setting.