Setting up an external modem for trap dial-out, Setting up call directories for trap dial-out – Paradyne 9820-2M User Manual
Page 41
Configuration Options
4-5
9820-A2-GB20-20
June 2000
Setting Up for Trap Dial-Out
(Models 9820, 9820-2M, 9820-8M)
An external modem can be attached to the COM port for dialing out when an
SNMP trap is generated.
To set up an external modem, you need to:
1. Set up SNMP trap managers.
2. Set up an external modem.
3. Set up Modem Directory phone numbers.
4. Configure trap dial-out.
Setting Up Call Directories for Trap Dial-Out
when trap dial-out is desired.
for trap and alarm information.
Setting Up an External Modem for Trap Dial-Out
(Models 9820, 9820-2M, 9820-8M.) When trap dial-out is desired, the PC or
asynchronous terminal must be disconnected from the unit’s COM port when
setup is complete, and an external modem connected instead. See
the COM Port to Support an External Modem
Setting Up Call Directories for Trap Dial-Out
(Models 9820, 9820-2M, 9820-8M.) To set up call directories:
"
Procedure
1. Set up directory phone numbers.
Main Menu
→
Control
→
Modem Call Directories
2. Select Directory Number A (for Alarm).
3. Enter the phone number(s).
Valid characters include . . .
For . . .
ASCII text
Entering the phone number.
Space,
underscore ( _ ), and
dash (–)
Readability characters.
Comma ( , )
Readability character for a 2-second pause.
B
Blind dialing.
P
Pulse dialing, unless B is specified.
T
Tone dialing, unless B is specified.
W
Wait for dial tone.
4. Save the phone number(s).