Paradyne 9820-2M - Manual (Page 119)

Monitoring
6-9 9820-A2-GB20-20 June 2000
Table 6-7. Network and User Data Port Control Leads
Label Indication What It Means
Both Network and User Data Ports
TD Transmit Data Data is being transmitted on the circuit.
RD Receive Data Data is being received on the circuit.
DTR Data Terminal Ready Shows the current state of the DTR control
lead.
DSR Data Set Ready Shows the current state of the DSR control
lead.
Additional Network Data Port Control Leads
TM Test Mode Shows the current state of the TM interface
control lead.
LMI OK LMI OK Local Management Interface is running
successfully on the frame relay link on the
network interface.
See Configuring the Physical Interfaces in Chapter 4, Configuration Options, for
additional information.