Paradyne 9820-2M - Manual (Page 183)

Setting Up NetScout Manager Plus for FrameSaver Devices
10-5 9820-A2-GB20-20 June 2000
Verifying Domains and Groups (Models 9820 and 9820-2M)
"
Procedure
1. From the NetScout Manager Plus main window, with the FrameRelay and
Admin radio buttons still selected, click on the Config Manager icon to open
the Configuration Manager main window.
2. Verify that only FrameSaver SLV-supported domains appear listed in the
Domain column. FrameSaver SLV-supported domains include:
— ATALK — IPX — RMON
— DECNET — NETB — SNA
— IP — NET~ — VINES
— IPV6 — OSI
3. Verify that:
— S (statistics collection) appears for each domain listed in the Group
column.
— H (hosts) appears for the IP domain only.
— Dashes occupy all other positions under the Group column.
— Zeros appear under the Samples and Interval SH and LH columns.
— Dashes appear under all Logging columns: Stat, Host, Conv.
4. If all these requirements are met, no further action is required. Close the
Configuration Manager window.
If all these requirements are not met, a FrameSaver SLV-supported domain
needs to be added, or if an unsupported domain needs to be deleted, the
Properties File must be edited.