Paradyne 9820-2M - Manual (Page 181)

Setting Up NetScout Manager Plus for FrameSaver Devices
10-3 9820-A2-GB20-20 June 2000
Configuring NetScout Manager Plus
For the NetScout Manager Plus main window to appear, make sure your
environment is set up exactly as specified in your NetScout Readme file.
You need to:
H
Copy the OpenLane directory to a user directory.
H Add frame relay agents to the NetScout Manager.
In addition, for Models 9820 and 9820-2M you need to:
H Configure agent properties.
H
Verify and correct domains and groups.
H Monitor the agent and DLCIs.
Refer to the NetScout documentation for additional information about accessing
and managing the FrameSaver SLV unit through NetScout Manager Plus, refer
to the:
H NetScout Manager/Plus User Guide to help you install the application,
monitor traffic, and diagnose emerging problems on network segments.
H NetScout Manager/Plus & NetScout Server Administrator Guide to help you
configure agents, remote servers, and report templates using the various
NetScout products.
H NetScout Probe User Guide to help you install the NetScout Probe between
the FrameSaver unit and its router, and configure the probe on network
segments you want to monitor.