Paradyne 9820-2M User Manual
Page 12
About This Guide
x
9820-A2-GB20-20
June 2000
Section
Description
Setting Up OpenLane for FrameSaver Devices. Identifies
where installation and setup information is located and how
FrameSaver units are supported.
Setting Up NetScout Manager Plus for FrameSaver
Devices. Describes setup of the NetScout Manager Plus
application so it supports FrameSaver units.
Setting Up Network Health for FrameSaver Devices.
Describes setup of Concord’s Network Health application
so reports can be created for FrameSaver units, and
identifies those reports that apply to FrameSaver units.
Hardware Maintenance (9820-45M). Describes
maintenance of the 9820-45M, including replacement of
the front panel assembly and power modules.
Menu Hierarchy. Contains a graphical representation of
how the user interface screens are organized.
SNMP MIBs and Traps, and RMON Alarm Defaults.
Identifies the MIBs supported and how they can be
downloaded, describes the unit’s compliance with SNMP
format standards and with its special operational trap
features, and describes the RMON-specific user history
groups, and alarm and event defaults.
Connectors, Cables, and Pin Assignments. Shows the
rear panel, tells what cables are needed, and provides pin
assignments for interfaces and cables.
Lists key terms, acronyms, concepts, and sections.
A master glossary of terms and acronyms used in Paradyne documents is
available on the World Wide Web at www.paradyne.com. Select
Library
→
Technical Manuals
→
Technical Glossary
.