Paradyne 9820-2M - Manual (Page 106)

Security and Logins
5-8 9820-A2-GB20-20 June 2000
Controlling SNMP Access
The FrameSaver unit supports SNMP Version 1, which provides limited security
through the use of community names. There are three methods for limiting SNMP
access:
H
Disabling SNMP access.
H Assigning SNMP community names and the access type.
H
Assigning IP addresses of those NMSs that can access the unit.
Disabling SNMP Access
When the SNMP access is disabled, the FrameSaver unit will not respond to
SNMP messages.
"
Procedure
To disable SNMP access:
1. Select the General SNMP Management options.
Main Menu
→
Configuration
→
Management and Communication
→
General SNMP Management
2. Disable the SNMP Management option.
3. Save your change.
See Configuring General SNMP Management in Chapter 4, Configuration
Options, for more information about General SNMP Management configuration
options.