Paradyne 9820-2M - Manual (Page 218)

SNMP MIBs and Traps, and RMON Alarm Defaults
B-2 9820-A2-GB20-20 June 2000
MIB Support
The FrameSaver unit supports the SNMP Version 1, and has the capability of
being managed by any industry-standard SNMP manager and accessed by
external SNMP managers using the SNMP protocol.
The following MIBs are supported:
H
MIB II (RFC 1213 and RFC 1573)
H Frame Relay DTEs MIB (RFC 2115)
H
RS-232-Like MIB (RFC 1659)
H Frame Relay Service MIB (RFC 1604)
H
Enterprise MIB
H RMON Version 1 MIB (RFC 1757)
H
RMON Version 2 MIB (RFC 2021)
Downloading MIBs and SNMP Traps
Paradyne standard and enterprise MIBs are available from the Paradyne World
Wide Web site.
"
Procedure
To access Paradyne MIBs:
1. Access the Paradyne World Wide Web site at www.paradyne.com.
2. Select Technical Support.
3. Select Management Information Base (MIBs).
The download procedure may vary depending upon your browser or NMS
application software. Refer to your browser or NMS manual for additional
download information.