Paradyne 9820-2M - Manual (Page 232)

SNMP MIBs and Traps, and RMON Alarm Defaults
B-16 9820-A2-GB20-20 June 2000
Network Synchronous Port Physical Interface Alarm Defaults
These alarms only apply to the FrameSaver unit’s network data port interface.
They are created during RMON initialization and put into the Paradyne-defined
alarm area.
Table B-10. Network Synchronous Port Physical Interface Alarm Defaults
Item
Sample
Type
1 MIB/Tag/OID 2 Interval
Event
Type
Rising
Threshold
Default Falling
Threshold
Default
Unavailable
Seconds D MIB: pdn_SyncPortStats.mib (E)
Tag: devSyncPortStatsUASs
OID:.1.3.6.1.4.1.1795.2.24.-
2.6.6.5.1.1.2.I
900 secs
(15 mins) Rising 1 1
1 D = Delta. Indicates that the calculated difference between the current value and the previous value is contained
in the MIB.
2 I in the OID = Interface ID of the frame relay link.