Panasonic AV-HS450N - Manual (Page 79)

79
3. Basic operations
3-8. Internal color signals
3-8-1. Setting the color background
The color background to be used by the bus can be set.
Two methods are available: under one method the Hue (hue), Sat (color saturation) and Lum (luminance) are set,
and under the other the 8 preset colors (white, yellow, cyan, green, magenta, red, blue and black) are called.
The Hue, Sat and Lum of the called colors can also be adjusted.
Adjusting the colors
Press the [CBGD] button and display the CBGD menu.
 Refer to “2-1-5. LCD menu area”.
display>
CBGD 1|Hue |Sat |Lum |Load↓
CBGD | 0.0| 0.0| 100.0| White
0.0
|
359.9 0.0
|
100.0 0.0
|
108.0 Yellow
Cyan
Green
Magenta
Red
Blue
Black
Turn [F2], [F3] and [F4] to perform the color adjustments (Hue, Sat and Lum).
Calling the preset colors
Turn [F5] to select the preset color using the Load item, and press the [F5] switch.
The Hue, Sat and Lum values are changed to the preset color values.
 To save the values that were set before calling the preset color, refer to “3-10. Memory”.