Panasonic AV-HS450N - Manual (Page 163)

163
8. Setting menu table
A setting is entered when an item displayed ( ↓) is selected and then the [F1], [F2], [F3], [F4] or [F5] switch is
pressed.
(It will not be entered unless the switch is pressed.)
Menu
Sub menu Parameter 1 Parameter 2 Parameter 3 Parameter 4
Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
KEY KEY 1 Parameter Type LumKey Fill PVW
KEY Setting range Lum, Linear,
Chroma, Full ChrmOn, ChrmOff Bus, Matte Auto, Off, On
Default value Linear ChrmOff Bus Auto
KEY 2 Parameter Clip Gain Density Invert
Adjust Setting range 0.0 to 108.0 0.0 to 200.0 0.0 to 100.0 On, Off
Default value 0.0 100.0 100.0 Off
KEY 3 Parameter Hue Sat Lum Load ↓
FillMatt Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0 White, Yellow,
Cyan, Green,
Magenta, Red,
Blue, Black
Default value 0.0 0.0 100.0 White
KEY 4 Parameter Type Width Direc
Edge Setting range Off, Border, Drop,
Shadow, Outline 0 to 4 0, 45, 90, 135, 180,
225, 270, 315
Default value Off 2 0
KEY 5 Parameter Hue Sat Lum Load ↓
EdgeCol Setting range 0.0 to 359.9 0.0 to 100.0 0.0 to 108.0 White, Yellow,
Cyan, Green,
Magenta, Red,
Blue, Black
Default value 0.0 0.0 0.0 Black
KEY 6 Parameter X-Pos Y-Pos CopyTo ↓
WIPEPos Setting range −100.00 to 100.00 −100.00 to 100.00 Displays the copy
destination.
Default value 0.00 0.00
KEY 7 Parameter X-Pos Y-Pos CopyTo ↓
SQPos Setting range −100.00 to 100.00 −100.00 to 100.00 Displays the copy
destination.
Default value 0.00 0.00
KEY 8 Parameter X-Pos Y-Pos Size
FlyKEY Setting range −100.00 to 100.00 −100.00 to 100.00 0.0 to 400.0
Default value 0.00 0.00 100.0
KEY 9 Parameter Light
Modify Setting range On, Off
Default value Off
KEY 10 Parameter Mask Invert
Mask Setting range Off, Manual, 4:3 On, Off
Default value Off Off
KEY KEY 11 Parameter Left Top Bottom Right
MaskAdj Setting range −50.00 to 50.00 −50.00 to 50.00 −50.00 to 50.00 −50.00 to 50.00
Default value –25.00 25.00 –25.00 25.00
KEY 12 Parameter OutPatt
Trans Setting range Nor, Rev
Default value Nor