Panasonic AV-HS450N - Manual (Page 49)

49
3. Basic operations
3-4-2. Selecting the key material
Selecting the key fill signal
Press the [KEY] button among the AUX bus selector buttons to light its indicator, and press one of the AUX bus
crosspoint buttons 1 to 32 to select the key fill signal.
Selecting the key source signal
On the CONFIG menu, set the key source for key fill.
This setting is the same for KEY and DSK.
Setting with AUX bus crosspoint buttons
Press the [KEY] button (or [DSK 1/2] buttons) of the AUX bus selector buttons to light its indicator, and hold
down the AUX bus crosspoint button for the selected key fill signal.
display>
XPTStats| FILL: INPUT1 SRC↓ INPUT1
| XPT : 1
Turn the [F5] and select a key source signal (SRC) for the key fill signal (FILL), and press the [F5] switch.
Setting in the CONFIG menu
Press the [CONFIG] button to light its indicator, and display the CONFIG menu.
 Refer to “2-1-5. LCD menu area”.
Turn [F1] to display the KSAsign sub menu.
display>
CONFIG11|Fill |Source↓| |
KSAsign | —| —| |
IN1~16
IN-A1
IN-A2
IN-B1
IN-B2
CBGD
CBAR
FMEM1~4 IN1~16
IN-A1
IN-A2
IN-B1
IN-B2
CBGD
CBAR
FMEM1~4
NoAsign
Turn [F2] to select the key fill material using the Fill item.
Turn [F3] to select the key source material using the Source item, and press the [F3] switch.
The luminance and chroma keys are used as self keys so the key fill signal can be used as the key source
signal regardless of the menu setting.