Panasonic AV-HS450N - Manual (Page 113)

113
4. Input/output signal settings
4-3-1. Assigning the output signals
Assign the output signals to OUTPUT1 to OUTPUT10.
Press the [OUTPUT] button to light its indicator and display the OUTPUT menu.
 Refer to “2-1-5. LCD menu area”.
Turn [F1] to display the OUTPUTYY sub menu.
(Y: OUT1 to OUT6, A1, A2, B1 or B2)
The output used to assign the output signal is selected for Y.
Turn [F2] to display the Asign sub menu.
display>
OUTPUTYY|Asign |Souce |Mode↓ |
| 1/2 | PGM|
 Normal|
PVW
CLN
AUX1~4
MV1,MV2
KeyOut DC
Turn [F3] to set the type of output signal using the Source item.
PGM: An image provided with the wipe, mix, key, downstream key or other effect is output at the
switcher's main line output.
PVW: This is the preview output that enables the next operation to be checked before it is
executed.
AUX 1 to 4: The signals selected by the AUX bus in lines 1 to 4 are output.
CLN:
The clean signal (the image resulting when the key, downstream key or other effect has
been removed from the PGM signal) is output.
 Refer to “Assigning the CLN signal”.
MV 1, MV 2: The multi view display signals in two lines are output.
Multiple input signals and output signals are reduced in size and output to one screen.
KeyOut: The key signal is output.