Panasonic AV-HS450N - Manual (Page 34)

34
3. Basic operations
All SHIFT
All SHIFT is used to switch all the materials of the PGM/A bus crosspoint buttons, PST/B bus crosspoint buttons
or AUX bus crosspoint buttons from front materials to rear materials or vice versa.
The USER button to which the SHIFT function has been allocated is used to switch between the front materials
and rear materials.
Allocate the SHIFT function to one of the USER buttons.
For the method used to allocate this function to the USER button, refer to “5-3-1. Setting the user buttons”.
Each time the [SHIFT] (USER) button is pressed, the front materials are switched to the rear materials or
vice versa.
 When the rear materials (17 to 32) have been selected, the [SHIFT] (USER) button lights in amber.
 When the button is pressed again, it goes off, and the front materials (1 to 16) are now selected.
Single SHIFT
Single SHIFT is used to switch the material of a PGM/A bus crosspoint button, PST/B bus crosspoint button or
AUX bus crosspoint button from a front material to a rear material or vice versa.
Switching between the front material and rear material is done using the crosspoint button (No.16 or No.1) in
which the SHIFT function is allocated.
 Allocating the SHIFT function
Press the [XPT] button to light its indicator, and
display the XPT menu.
 Refer to “2-1-5. LCD menu area”.
Turn [F1] to display the XPTAsing sub menu.
XPT 5|XPT |Signal |Shift |Sf-Lock
XPTAsing| —| —| Right| Off
1~32 IN1~16
IN-A1
IN-A2
IN-B1
IN-B2
Black
CBGD
CBAR
FMEM1~4
PGM
PVW
CLN
MV1
MV2
None
Left
Off On
1 /17 2 /18 3 /19 4 /20 5 /21 6 /22 7 /23 8 /24 9 /25 10 /26 11 /27 12 /28 13 /29 14 /30 15 /31 16 /32
PGM/A
AUX
PST/B
KEY PinP 1/2 DSK 1/2 AUX1 AUX2 AUX3 AUX4
SHIFT
SHIFT
SHIFT
CAM
MEM
1 2 3
4 5 6
KEY
MENU FUNCTION / AUX BUS DELEGATION USER
CKEY
BKGD
PinP1
PinP2
DSK1
DSK2
TIME
CBGD
IMAGE A
IMAGE B
FMEM
SDCard
CTL
CAM
XPT
MV
IN
OUT
CONFIG
SYS
AMBER:1 / GREEN :2