Panasonic AV-HS450N - Manual (Page 145)

145
5. System settings
Example of connections (when the unit and a controller are connected)
Controllers that can be connected: AW-RP655N, AW-RP555N
For details on connecting the pan-tilt heads and controller or connecting the pan-tilt heads and cameras, refer to
the operating instructions of each device.
IN2 SIGNAL
GND REF EDITOR
COM TALLY/GPI PANEL LAN
2 3 4 5 6
3 2 1 4 5 6 7 8 9 10 11 12 13 14 15 16 C/C
U/C
1 SDI OUTPUTS
SDI INPUTS
DVI-D OUTPUTS
IN/OUT B2 IN/OUT B1 SLOT B IN/OUT A2 IN/OUT A1 SLOT A
Camera
Pan-tilt head
REMOTE/SERVICE
connector
COM connector
Video signals
Control signals
Cable length: Max. 32.8 ft. (10 m) Cable length: Max. 656 ft. (200 m)
Twisted pair cable (AWG24)
RS-422
RS-232C
converter
AW-RP655N AV-HS450N


RXD –
TXD –
TXD +
GND
RXD +
CTS
RXD
TXD
DTR
RTS
DSR
GND
1 FRAME GND
2 RXD –
3 TXD +
4 GND
5
6
GND
7 RXD +
8 TXD –
9 FRAME GND
NC
1
2
RXD IN
3 TXD OUT
4 DTR
5
6
DSR
7 RTS
8 CTS
9
GND
COM REMOTE/SERVICE
1 2 3 4 5
9 8 7 6 5 1
9 6 For pin assignments and specifi cations
of the RS-422
RS-232C converter,
refer to the operating instructions of
the converter used.
Pin No. Signal Pin No. Signal
AV-HS450N AW-RP655N
RS-422 RS-232C
converter
: Twisted pair cable