Panasonic AV-HS450N - Manual (Page 121)

121
4. Input/output signal settings
Input
signals
FS:
On, Off
Mode:
Normal, UC or
D by D (cannot be selected
when the system format is
720p)
Video effects
Output
signals

Delay:
90H (75H) or 1F 
 See “4-1-1. Setting the frame synchronizer”.
 See “4-5. Setting the down-converter
(option)”.
Frame synchronizer
DC
(Down-converter)
OutPhs Input Non-
synchronized
input
Output signal 
Normal
Output signal 
DC (90H)
Output signal 
DC (1F)
System Mode FS Phase
Delay
amount
Phase
Delay
amount
Phase
Delay
amount
Sync signal (Ref): Black burst signal (BBST), tri-level sync signal (TRI), internal reference signal (INT)
1H Normal Off Not possible Ref+1H 1H +90H 1H+90H In-phase
with 
1H+1F
Normal On Possible Ref+1H Max.
1F+1H +90H Max.
1F+1H
+90H In-phase
with 
Max.
2F+1H
UC/
D by D On
(Forced) Possible
0H
(Example 1) Normal/
UC/
D by D On
(Forced) Possible In-phase
with Ref Max.
1F +90H Max.
1F+90H In-phase
with 
Max.
2F
Sync signal (Ref): Black burst signal (BBAD)
1H Normal Off Not possible Ref–90H
+1H 1H +90H 1H+90H In-phase
with 
1F+1H
Normal On Possible Ref–90H
+1H Max.
1F–90H
+1H +90H Max.
1F+1H In-phase
with 
Max.
2F–90H
+1H
UC/
D by D On
(Forced) Possible
0H
(Example 2) Normal/
UC/
D by D On
(Forced) Possible Ref–90H Max.
1F–90H +90H
(In-phase
with Ref) Max.
1F In-phase
with 
Max.
2F–90H
 For 1080/50i and 720/50p, the 90H indicated above becomes 75H.
 Conversion based on the HD format applies for 1H.
 When DVE effect, IMAGE effect and PinP effect have been used as the video effects, the output signal is
delayed by +1F.
 The phase and delay amount for the DVI input signals are the same as when UC/D by D is selected since the
frame synchronizer is set to the On mode.
 The DVI output signals are delayed by +1F.
 When images are output to a multi view display, they are delayed by +1F.
 When DVI output signals are output images for a multi view display, the output images are delayed by +2F.