Panasonic AV-HS450N - Manual (Page 174)

174
Menu
Sub menu Third menu Parameter 1 Parameter 2 Parameter 3
Turn F1 to select. Turn F2 to select. Turn F3 to select. Turn F4 to select. Turn F5 to select.
INPUT INPUT XX*
(Csit)
* A1, A2, B1 or
B2 is displayed
for X.
FS Parameter FS Mode ↓ AnaGain
1/5 Setting range On, Off Normal, DbyD,
UC, Auto –30 to +30
Default value On Normal 0
Freeze Parameter Select Freeze ↓
2/5 Setting range Frame, Field Toggling between
On and Off
Default value Frame Off
Name Parameter Type ↓ Name
3/5 Setting range Defalt, Preset,
User
Default value Defalt
UpConv1 Parameter Scale ↓ MovDet ↓ Sharp ↓
4/5 Setting range SQ, EC, LB 1 to 5 1 to 5
Default value SQ 3 3
Setting Parameter Chroma Ped Hue
5/5 Setting range –8 to +7 –100 to +100 −30 to +30
(Enabled when the
system format is
set to 1080/59.94i,
720/59.94p and
480/59.94i.)
Default value 0 0 0
OUTPUT OUTPUTYY*
(SDI)
* Out1 to 4, A1,
A2, B1 or B2 is
displayed for Y.
Asign Parameter Souce Mode ↓
1/2 Setting range PGM, PVW, CLN,
AUX1 to 4, MV1 to
2, KeyOut Normal, DC
Default value — Normal
DownCnv Parameter Scale ↓ Delay ↓ Sharp ↓
2/2
(This submenu is
available when
the AV-HS04M7
option board has
been connected.) Setting range SQ, EC, LB 90H(75H), 1F 1 to 5
Default value SQ 90H 3
OUTPUTYY*
(ANA)
* A1, A2, B1 or
B2 is displayed
for Y.
(This submenu
is available when
the AV-HS04M7
option board has
been
connected.)
Asign Parameter Souce
1/1 Setting range PGM, PVW, CLN,
AUX1 to 4, MV1 to
2, KeyOut
Default value —
8. Setting menu table