Panasonic TQBJ0350 - Manual (Page 68)

PROJECTOR SETUP menu
68
- ENGLISH
Settings
STATUS
Displays the status of the projector.
Press ▲▼ to select [STATUS]. 1 )
Press button. 2 )
Press ◄► to move to the next page. 3 )
INPUT
Displays the input selection
state.
SIGNAL NAME Displays the input signal name.
SIGNAL
FREQUENCY
Displays the frequency of the
input signal.
PROJECTOR
RUNTIME
Displays the projector runtime.
LAMP
ECO: z
LAMP POWER: Shows the
lamp lighting time in ECO
mode.
NORMAL: z
LAMP POWER: Shows the
lamp lighting time in NORMAL
operation.
TOTAL: z
Shows the total lamp lighting
time.
INTAKE
AIR TEMP.
Displays the intake air
temperature of the projector.
OPTICS
MODULE TEMP.
Displays the temperature inside
the projector.
AROUND
LAMP TEMP.
Displays the temperature around
the lamp of the projector.
NUMBER OF
ENTRY SIGNAL
Displays the number of
registered signals.
REMOTE
STATUS
Displays [REMOTE] control
status.
PROJECTOR
TYPE
Displays type of projector.
SERIAL
NUMBER
Displays the serial number of the
projector.
LAMP UNIT
MODEL NO.
Displays the component number
of the lamp unit.
LAMP SERIAL
NUMBER
Displays the serial number for
lamp.
MAIN VERSION Displays the main version of the
firmware of the projector unit.
SUB VERSION Displays the sub version of the
firmware of the projector unit.
NETWORK
VERSION
Displays the network version of
the projector unit.
EMULATE Displays the set emulate mode.
ON COUNT
POWER ON TIMES : z
Displays the number of times
the power has been turned
on.
LAMP ON : z
Displays the number of times
LAMP has been lit.
*1 :
Lamp replacement time =
LAMP POWER [NORMAL] lighting time
+ (LAMP POWER [ECO] lighting time x 2 ÷ 3)
DATE AND TIME
This lets you set the time zone and the current date
and time for the projector’s internal clock.
J
Setting the TIME ZONE
Press ▲▼ to select [DATE AND TIME]. 1 )
Press button. 2 )
Press ▲▼ to select [TIME ZONE]. 3 )
Press ◄► to switch [TIME ZONE]. 4 )
J
Adjusting the date and time
manually
Press ▲▼ to select [DATE AND TIME]. 1 )
Press button. 2 )
Press ▲▼ to select [ADJUST CLOCK]. 3 )
Press button. 4 )
The [ADJUST CLOCK] screen will be displayed. z
Press ▲▼ to select the item to be set, 5 )
and press ◄► to set the local time.
Press ▲▼ to select [APPLY], and
6 )
press button.
This completes setting of the time. z