Automatic adjustment, Using the function buttons, Using eco button – Panasonic TQBJ0350 User Manual
Page 38: Basic operations using the remote control, English, Button, Buttons
Basic operations using the remote control
38
- ENGLISH
Basic Operation
Automatic adjustment
The automatic setup function can be used to
automatically adjust the resolution, clock phase and
picture position when analog RGB signals consisting
of bitmap images such as computer signals are being
input, or to automatically adjust the picture position
when DVI-D/HDMI signals are being input.
It is recommended to supply images with a bright
white frame at the outermost periphery containing
characters etc. that are clear in white and black
contrast when the system is in automatic adjustment
mode.
Avoid supplying images that involve halftones
or gradation such as photographs and computer
graphics.
button
Press
remote control or the main unit.
A message [COMPLETE] appears if adjustment is
z
ended normally.
Note
[CLOCK PHASE] may have been shifted even when the
z
adjustment ended normally. In this case, manually adjust
the [CLOCK PHASE].
Refer to “CLOCK PHASE” of “POSITION menu”
(
Æ
page 50) for details.
If an image with blurred edges or a dark image is input,
z
[INCOMPLETE] may appear or adjustment may not
be performed properly even if [COMPLETE] appears.
In this case, manually adjust the items of “INPUT
RESOLUTION” of “ADVANCED MENU” (
Æ
page 52),
“SHIFT” and “CLOCK PHASE” of “POSITION menu”
(
Æ
pages 48, 50).
For specific signals, adjustment should be made
z
according to “AUTO SETUP” of “DISPLAY OPTION
Æ
page 57).
[AUTO SETUP] may not be available depending on the
z
machine type of the personal computer.
Automatic adjustment may not available for
z
synchronization signal of C-SYNC and G-SYNC.
Image may be distorted for several seconds during
z
automatic adjustment. This is not a malfunction.
For every supplied signal, adjustment is required.
z
Automatic adjustment can be canceled by pressing
z